BWYLB - 5248 HIGH PERFORMANCE ACRYLIC COATING
- MSDS: BWYLB
- Manufacturer: RUST OLEUM CORP
- Product Name: 5248 HIGH PERFORMANCE ACRYLIC COATING
- National Stock Number: 8010-00F039664
Product Identification
Product ID:5248 HIGH PERFORMANCE ACRYLIC COATING
MSDS Date:01/14/1993
FSC:8010
NIIN:00F039664
MSDS Number: BWYLB
Responsible Party
VERNON HILLS, IL 60061-1583
US
Emergency Phone: 708-367-7700
Info Phone: 708-367-7700
Cage: 08882
Contractor
Telephone: 847-367-7700
Cage: 08882
Ingredients
PROPANOIC ACID, 2-METHYL, MONOESTER
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: 5%
DIETHYLENE GLYCOL METHYL ETHER, 2-(2-METHOXYETHOXY) ETHANOL
CAS: 111-77-3
RTECS: KL6125000
Fraction By Weight: 0.3%
1,2-PROPANEDIOL (PROPYLENE GLYCOL)
CAS: 57-55-6
RTECS: TY2000000
Fraction By Weight: 5%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF NOSE, THROAT
& LUNGS. SKIN/EYES: PRIMARY IRRITANT. INGESTION: GI IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, NAUSEA, VOMITING,
DIARRHEA.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH IMMEDIATELY
W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH AFFECTED AREA
W/SOAP & WATER. INGESTION: DILUTE STOMACH CONTENTS W/TWO GLASSES OF
WATER & INDU CE VOMITING BY EITHER GIVING IPECAC SYRUP/BY PLACING
TWO FINGERS AT BACK OF THROAT. NEVER GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:>200F
Fire Fighting Procedures:WATER MAY BE USED TO COOL CLOSED CONTAINERS TO
PREVENT BUILD-UP OF STEAM. IF WATER IS USED, FOG NOZZLES ARE
PREFERRED.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT DUE TO BUILD-UP OF STEAM.
Accidental Release
Spill Release Procedures:SOAK UP LIQUID W/ABSORBENT & SHOVEL INTO WASTE
CONTAINER. WASH AREA W/WATER & FLUSH TO SEWER SERVICED BY WASTE
WATER TREATMENT FACILITY.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING.
Exposure Controls
Respiratory Protection:WEAR A NIOSH APPROVED CHEMICAL CARTRIDGE
RESPIRATOR TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING
SPRAY APPLICATION.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST IN VOLUME & PATTERN TO KEEP
TLV BELOW ACCEPTABLE LIMITS.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:302-385F
Vapor Density:>1
pH:8-9.2
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:60-70
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT, OPEN FLAME, FREEZING.
Hazardous Decomposition Products:CO & CO2.
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.